cotton stalk pellet plant delivery to uzbekistan

Products

Cotton Stalk Pellet Plant Delivery to Uzbekistan

Author:Season Tian Release date: 2018-01-13Hits:

Uzbekistan is rich in cotton farming & production. Huge amount of cotton stalks is generated as byproduct. According to specification analysis and research, the best solution to utilize cotton stalk is to pelletize it into solid fuel. Because cotton stalk has very high calorific value which is similar with wood, but very low ash content. Cotton stalks are considered to be very suitable raw material to produce biomass solid fuel. Cotton stalk pellets can replace fossil fuels, such as LPG, natural gas, oil, etc.

SIMEC is now strategic partner of the biggest producer of pellet burners and pellet boilers in Central Asia. As supplier of pelletizing technology & pellet machines, SIMEC will build a complete cotton stalk pellet project in Uzbekistan. Capacity is designed to be 2 tons/hour, including two sets of SPM420 biomass pellet mills.

The pellet project consists of cotton stalk crushing system, drying system, pelletizing system, pellet cooling & sieving system, jumbo bag bagging system, electric control system, etc..

All machines are fabricated in SIMEC mills and are ready for delivery. All cargos will be delivered to Tashkent by train. Totally 4 pieces of 40 ft containers are required to load all of these machines.

After Chinese New Year, SIMEC will send engineers to Tashkent and work on installation & commissioning. After successful running of this project, another 4 tons/hour complete cotton stalk pellet plant will be built accordingly.

Overall Dimension of SPM420 cotton stalk pellet mill: Length 2800mm x Width 1250mm x Height 2200mm. Gross weight: 3.2 Tons.

packaged-spm420-pellet-mill

upper-and-lower-part-of-spm420 spm420-biomass-pellet-mill

Packing details of crushing system:

No.	Item	Size (MM）	Weight（kg）
1	Motor	280017002050	3155
2	Bending pipe	325*1200	26
3	Striaght pipe	325*4540	74
4	Bending pipe	325*900	22
5	Cyclone	4600*2200	402
6	Cyclone ground legs（2 pcs）	3800*1570	124
7	Cyclone crossgirder	1430*180	28
8	Double bending pipe	273*2250	38
9	Striaght pipe	273*5120	70
10	Bending pipe	273*950	16
11	Draught fan including motor	120010501000	314
12	Striaght pipe	273*2900	42
13	Bending pipe	273*960	18
14	Dust collector ground leg	4500*150	74
15	Upper dust collector box	2150*2000	160
16	Lower dust collector box	200019501100	170
17	Dust collector door	2250*960	74
18	Dust collector back plate	2500*1900	172
19	Conveyor supporter	6000*1030	124
20	Conveyor ground leg	1800*2030	22
21	Conveyor roller	900*320	10
22	Conveyor roller	380320300	30
23	Conveyor front roller	1100*270	60
24	Conveyor rear roller	1120*270	56
25	Conveyor roller supporter	1000*400	18
26	Conveyor reducer including motor	70*350	90
27	Cyclone accessories	300*300	20
28	Conveyor motor supporter	1000570510	34
29	Belt	800*450	94
30	Switch box	1750720410	85
31	Screw, cloth bag	600*300	28
32	Air lock valve, reducer, motor	1000400410	140
33	Air lock valve discharging pipe	325*500	6
	Total (33pcs）		5796（kg）

stalk-crusher simec-stalk-crusher dust-collector-base

packaged-stalk-crusher packaged-rotary-cooler straight-pipe

Packing details of drying system:

No.	Item	Equipment	Qty.	*Size(LWH)*	Weight(KG)
SIMEC-1	Main Body		1	1190023302480	12950
SIMEC-2	Hot air stove		1	320023602130	9504
SIMEC-3	Cyclonedust collector		1	Φ1600*4200	421
SIMEC-4	Electric control cabinet		1	1000800450	82
SIMEC-5	Induced draft fan		1	190010001000	280
SIMEC-6	Belt conveyor	Ground legs	1	8000600500	585
SIMEC-7	Discharging machine		1	Φ219*3800	280
SIMEC-8	Water tank	Whole set screw	1	Φ1200*1500	312
SIMEC-9	Air blower		1	500500400	55
SIMEC-10	Large U-type elbow		1	1800Φ400700	105
SIMEC-11	Small U-type elbow		1	1600Φ400700	95.6
SIMEC-12	Long elbow		1	1200Φ400700	74.7
SIMEC-13	Short elbow		1	700Φ400700	56.8
SIMEC-14	Long reducing elbow		1	Φ400-850	34
SIMEC-15	Short reducing elbow		1	Φ400-360	19.5
SIMEC-16	Air blower inlet port reducing elbow		1	Φ600-Φ400*350	44
SIMEC-17	Connection pipe		1	Φ400*2840	89.7
SIMEC-18	Chimney		1	Φ400*3000	93.9
SIMEC-19	Hopper		1	130013001000	112
SIMEC-20	Air lock valev		1	800400400	54.3
SIMEC-21	Weight Scale		1	12001200300	125

belt-conveyor water-tank

rotary-cooler electric-cabinet

Packing details of pelletizing system:

No.	Item	Qty.	Weight（t）	LxWxH：mm	Remarks
1	Cooler lower part	1	1.290	2370x1650x1700	Including reduction box, vibration motor, 8 pieces of asseble bin plates.
2	Cooler upper part	1	0.540	1550x1500x1700	galvanized iron air screens, elevator bolts,1 bag of tape splicing block, 1 box of 25 magnetic core, 3 boxes of standard components(icluding 2 pcs of upper feed levelers, 2 pcs of lower feed levelers, 1 pc of screw feed leveler cooler, sealing strip, 2 sets of leveler bases, 2 electromagnetic switch).
3	Head and tail of elevator	2	0.834	1550x1500x1800	1 set of 9L airlock valve,2 sets of 2.2-3-17 reducers for elevator, 2 motor frame, 1 set of 25 permanent magnet barrel.
4	Cone bucket 1	1	0.400	1530x1530x1230	9 pcs of non-standard pipe bending, 36 pcs ofΦ400 flange
5	Cone bucket 2	1	0.504	1530x1530x1230	2 rolls of fix belt, 1 pcs of 20A chain, 3 bags of bucket elevator, 2 rolls of elevator belt, 6 flat rollers, 18 short rollers, 18 side supporters, 8 lower supporters, 4 parallel supporters and 1 protection shell.
6	LSS25 Auger	1	0.304	4500x460x580	Including reducer
7	Elevator straight pipe	1	0.908	2040x1950x1700	1 cooler supporter, 14 pcs of 2M straight pipe, 4 pcs of connections, 3 kinds of assemble chamer supporter 24 pcs.
8	Φ1000 cyclone	1	0.590	2500x1230x1320	1 set of 5 L air lock valve, 1.5-3-29、2.2-3-17 fixed reducer,4-72-4.5A-7.5K air blower, 1 set of W1,2 pcs of Φ219 pipe
9	50 stationary type	2	0.520	5000x850x1550	2 material trouwing shells, 3 feeding hoppes, 2 motor supporters, 1 pc of 25X40 pneumatic gate valve
10	Electric cabinet	1	0.362	1180x850x2050
	Total		6.252