palm efb chopping machine delivery to honduras

Products

Palm EFB Chopping Machine Delivery to Honduras

Author:Season Tian Release date: 2017-08-18Hits:

One set of BX-G318D2 type palm EFB chopping machine was delivered to Puerto Cortes, Honduras from Qingdao port in the first week of August.

There're three control options for this palm EFB chopper:

1. To control on the cabinet (this is available when technician is close to the cabinet)

2. To control by remote controller (this option is necessary when your technician is not in control room, but far from machine)

3. To control by far distant controller (this option can be installed very close to machine, for any urgent operation)

Three control options can make action at the same time. In palm oil mills, there’re often many impurities mixed with palm EFB, such as stones. The linkage control system will contribute to reduce running risk which is caused by impurities. It is specially designed by SIMEC R&D team.

Total 15 pcs of cargos are loading into 1 set of OT type 40'GP container. Below is the detail packing list.

No.	Items	Dimension (mm)	Amount	Weight (kg)	Remarks
01	Chipper Main Machine	350022501650	1	7550	Including accessories of main belt pulley triangular belt shield and so on.
02	185kw Motor	1400700900	1	1200	Including base, and fixed bolt and belt pulley.
03	Hydraulic Oil Station	5504501200	1	80	Including power motor, base frame and connecting pipes.
04	Electric Control Cabinet	12005502050	1	300	Including remote control, distant button and key.
05	Feed Conveyor	35001450850	1	280	Including weight of belt roller, styrofoam packing.
06	Feed Conveyor	25001450850	1	160	Including weight of belt roller, styrofoam packing.
07	Feed Conveyor Belt	￠600*1300	1	100	Including both ends belt fastener and flexible shaft connecting pin.
08	Output Conveyor	350016001100	1	350	Including power reduction gears and a set of drive roll.
09	Output Conveyor	35001600550	1	230	Including a set of driven roller.
10	Output Conveyor	30001600550	1	150	Middle part without rollers at both ends.
11	Conveyor Support	37001900100	1	60	Install according to the required output height.
12	Conveyor Support	17001700100	1	30	Install according to the required output height.
13	Output Conveyor Belt	￠800*1500	1	180	Including both ends belt fastener and flexible shaft connecting pin.
14	Plate Blade Adjusting Frame	1500450500	1	40	Styrofoam packing.
15	Accessory Tool Cabinet	1700550600	1	290	10 pieces of 70022020 Fly blade; 2 pieces of 70010020 plate blade; Kilo wrench (0-50kg including a set of wrench and sleeve); Plate blade puller (metal welding components，including 1 set of screw puller); 6 pieces of C-4500-4800 model main machine triangular belt; Output upper roller (for output conveyor) 16 pieces; Output lower roller (for output conveyor) 3 pieces; Belt connecting pin (for feed and output conveyor belts) 2 pieces;
	Total	Volume is about 30m³	15	11000